Prepare: Stunner install complete,  all wire connection well. 

1.Put input power cord into the power input hole in the back of device (SQ08E series on front panel)and then turn on the power switch . Now if the panel displays "000", it said power supply is normal.

2.Turn on the "RUN switch" on the panel. If "WORK" LED indicator is light (green) and the frequency meter shows the operating frequency  on the panel, it indicates that the system has been launched.

3.Adjust the output of voltage with rotary switch"output adjustment". (In accordance with the experience of hundreds of customers, the current went through each chicken should be controlled to 10-15mA.For example, if there are 20 chicken in the sink, and the voltage output of device should be controlled between 10 and 20V, now the current will be depended on the chicken quantity simultaneously in the sink. Commonly the current will be 100-300mA.)

4.Adjust the output frequency with rotary switch" frequency adjustment" , the frequency meter show the actual output frequency .